Skip to content
Gillette, WY
IICRC S520 Standard · Campbell County

Mold Remediation in Gillette, WY — Mountain Storm Response

Ice Dam Now provides mold remediation in Gillette, WY and the surrounding Campbell County after ice dam leaks. Work runs to IICRC standards with containment where needed and daily moisture readings, the interior repair is done in-house by the same company, and everything is documented in Xactimate line items on one insurance claim.

Claim-ready records — Dated photos and Xactimate line items alongside the water loss
Interior repair in-house — Insulation, drywall, texture, trim and paint put back by the same crews
Containment first — Poly barriers and negative air so spores stay in the work area
Dried and documented — Moisture readings to a dry standard before any rebuild starts

Get Ice Dam Help Gillette

A few quick questions, then pick a time. If water is coming in, call instead.

What is the zip code of the home?

Roof leaking right now? Call (888) 561-9664 — that is faster than any form.
Water coming through the ceiling?Every hour an ice dam sits there, more water gets under the shingles.Call (888) 561-9664
24/7
Dispatch All Winter
Steam
Only — No Pressure
Campbell
County Coverage
Same Day
For Active Leaks
Insured
Licensed & Harness-Certified

Homeowners across Campbell County call about icicles. Icicles are cosmetic. The dam behind them, holding back standing water, is not. As part of our complete Gillette winter roof services, crews handle mold remediation across Campbell County.

Sun on Cold Snow: The Gillette Pattern

Thin air at altitude means intense direct sun even in deep cold. A Gillette roof can be melting on its south face at midday in air that never gets near freezing, and all of that water has to go somewhere.

Diagram showing how ice dams form on a roof from heat loss and snow melt
Heat escaping into the attic melts roof snow; the meltwater refreezes at the cold eave and the dam grows a layer every cycle.

Depth makes it worse. A Campbell County roof can carry several feet of pack, and all of that is a reservoir sitting above an eave that never sees sun.

Ice-barrier practice in Campbell County

Design snow loads up here are among the highest in the country, and the membrane and retention details that come with them are not paperwork. On an older Gillette cabin neither is likely to be present.

Mold Remediation in Gillette: How The Work Runs

What it looks like from the homeowner side

Most people stay in the house. The affected room or attic is sealed off, the equipment runs for a few days, and the crew comes and goes through a zippered door in the containment. Mold in the Attic After an Ice Dam.

The noise is the air scrubbers and dehumidifiers running around the clock. Placement can usually be worked around bedrooms, and the timeline is set out before anything starts.

Containment and negative air

Before anything moldy is disturbed, the work area gets sealed off with poly sheeting and put under negative air pressure with an HEPA air scrubber exhausting it. Air flows into the work area, not out of it.

That is the step that keeps a contained attic or ceiling problem from becoming a whole-house problem in Gillette. Disturbing mold without it spreads spores to rooms that were clean.

Remediation, then the rebuild, from one company

Removing mold is only half a job if you then have to find someone else to hang drywall, re-insulate and paint. Ice Dam Now does the interior repair as well: new insulation, drywall, texture, trim and paint, so the ceiling that came down to get the mold out goes back up under the same scope and the same claim.

That also means one set of photographs and moisture readings runs from the first visit to the finished room, which is what an adjuster wants to see.

Mold in the walls below an ice dam

Water that gets past the attic runs down the inside of exterior walls, wetting the top plate, the insulation in the stud bays and the back of the drywall. It is common to find growth inside a wall where the only visible sign was a faint stain at the ceiling line.

Those cavities get opened, the wet insulation and drywall come out, the studs are cleaned and dried, and the wall is rebuilt once readings are at standard.

What comes out and what gets cleaned

Porous material that has grown mold, such as wet insulation, drywall paper and ceiling tile, cannot be reliably cleaned, so it comes out, bagged inside the containment.

Structural wood is different. Rafters, joists and sheathing with surface growth are HEPA vacuumed, cleaned and treated. Where the wood has gone soft or lost strength from repeated wetting, it gets cut out and replaced.

Technician in protective suit removing mold-covered drywall from interior wall
A certified remediation technician carefully removes mold-damaged drywall, revealing severe mold growth on wall framing.

What you get in Gillette

  • Framing and sheathing cleanedHEPA vacuuming, cleaning and treatment, or replacement where the wood is compromised
  • HEPA air scrubbingAir filtration running for the whole job, not just the tear-out
  • Claim-ready recordsDated photos and Xactimate line items alongside the water loss
Mold Remediation in Gillette, WY — specification
Service specification for Gillette, WY
MethodContainment, HEPA filtration and drying to a measured IICRC standard
Interior repairInsulation, drywall, texture, trim and paint, done in-house after drying
ServiceMold Remediation in Gillette, WY
Dispatch window24 to 48 hours in mountain terrain
Primary climate stressorSolar melt on deep pack, shaded eaves
BillingXactimate line items on one claim; carrier billed directly where the policy allows
Coverage areaGillette and Campbell County

Gillette Coverage and the Adjoining Communities

Crews working Gillette cover the adjoining communities on the same route — Rozet — so a storm week usually means one truck handling several addresses in Campbell County rather than separate trips.

Nearest hub towns with their own mold remediation pages: Sheridan, Douglas, Casper, Powell, Riverton, Cody.

Coverage runs across Gillette and the nearby towns all winter, and capacity is surged into whichever Wyoming market the storm actually hits.

Most jobs do not stop at one service. Mold Remediation in Gillette often runs alongside water mitigation & dryout in Gillette, and both get written into one scope rather than billed as separate visits.

Active leak right now? Our 24/7 Gillette steam ice dam removal crews are dispatched first during a freeze event. Call (888) 561-9664.

One Event, One Claim

Everything The Ice Dam Caused In Gillette, On One Claim

Taking the ice off is usually the cheapest part. The water that already got in, the mold it leaves, the ceiling that has to come down and sometimes the roof itself are one loss event, so they go on one insurance claim, handled by one company.

How it goes on the claim

  • One loss, one claim number. Removal, mitigation, mold, interior repair and roof damage from the same ice dam are reported as one event.
  • Broken out by coverage. Mitigation, mold (often under its own sublimit), interior repair and the roof are written as separate Xactimate sections, so a question on one line does not hold up the rest.
  • Documented the whole way. Dated photographs and moisture readings run from the ice on the roof to the finished room, from one company, in one file.
  • Honest about the limits. Coverage depends on your policy. A roof that was simply old is not storm damage, and you and your carrier make the coverage decision.
Ice Dam Claims In Gillette
Conditions We Work In

Mold Remediation In Practice

Conditions crews work in across Campbell County. Every job is photographed before and after.

black mold spots on attic rafter and OSB sheathing after ice dam damage
Black mold colonies visible on attic rafters and OSB sheathing following moisture intrusion from ice dams.
Severe black mold covering attic roof sheathing between exposed wood rafters
Extensive black mold growth covers attic sheathing following moisture intrusion from ice dams.
Mold remediation specialist in hazmat suit removing black mold from exposed wall studs
A certified mold remediation technician inspects and removes extensive black mold growth after ice dam water damage.
FAQ

Gillette and Campbell County FAQ

It is billed by the crew hour, and the rate plus a realistic time estimate are quoted on the phone before anyone is dispatched.

  • Scope drives the hours: length and thickness of the ice, roof pitch and height, and whether the gutters are frozen solid.
  • Access matters too — a three-story Gillette roof takes longer to set up on than a ranch.
  • The invoice matches the quote. There are no surprise add-ons written on the tailgate.

Because ice dams are made by heat loss, and two houses on the same street rarely leak heat the same way.

  • Attic air leaks around can lights, bath fans and the attic hatch are the usual source.
  • Crushed or missing soffit baffles stop the intake ventilation that would otherwise keep the deck cold.
  • An addition or dormer built over unheated space puts warm air right against a cold eave.
  • Local factor: altitude sun on deep pack makes the difference show up faster here than it would further south.

No. Steam removal is maintenance work, not construction, so no building permit is pulled for it anywhere in Campbell County.

  • A permit does come into it once the work becomes a repair — new decking, a re-roof or structural work.
  • That is handled through the Gillette building department, or the Campbell County building authority where the city has no department of its own.
  • Ask before signing anything: a contractor who says a re-roof in Gillette needs no permit is telling you something useful about how they work.

Please do not. Salt corrodes flashing, fasteners, gutters and anything metal it drains across, and it damages whatever is planted below.

  • Calcium chloride is less aggressive than rock salt but still ends up in the soil at the drip line.
  • A puck melts a hole, not a drainage path, so the water simply refreezes a few inches further on.
  • Crews use heat and nothing else - no salt, no chemicals, nothing corrosive.

Only where there is interior damage to document or dry. Pure exterior removal happens entirely from outside.

  • If water has come in, seeing it is what makes the claim documentation worth anything.
  • Attic access helps identify the heat source but is not required for removal.
  • Nobody needs to be home for exterior-only work, provided access and payment are arranged.

In most cases, yes. The work area is sealed off with containment and kept under negative air pressure, so air flows into the work area rather than out of it. Where the affected area is large, or someone in the home has a respiratory condition, that gets talked through before work starts.

Yes, and it is one of the most common causes of attic mold in snow country. Meltwater backs up under the shingles, wets the roof deck and the insulation along the eave, and those spaces stay damp all winter. Mold needs moisture and an organic surface, and an ice dam supplies both.

Nearby

Mold Remediation In Towns Around Gillette

Same-Day Response

Get A Gillette Crew Out

Waiting for a thaw is a strategy, but it is an expensive one — the melt has to go somewhere, and it goes into the insulation first.

✓ Licensed & insured✓ Low-pressure steam only✓ Rate quoted up front✓ Photos for your claim
Online Quote(888) 561-9664