Skip to content
Revere, MA
Structural Snow Load · Suffolk County

Commercial Roof Snow Removal in Revere, MA — Nor'easter Storm Response

Ice Dam Now provides commercial roof snow removal in Revere, MA and the surrounding Suffolk County, using low-pressure steam only — never chipping, salt or pressure washing. Crews are licensed, insured and harness-certified, dispatch same day for active interior leaks, and bill by the crew hour at a rate quoted before dispatch. Dated photo documentation is supplied for insurance claims.

Drains kept open — Scuppers and internal drains cleared so meltwater has an exit
Mid-span measured — Depth read over the longest unsupported span, not the average
Drift-point survey — Depth and density measured where it collects, not where it is convenient
Portfolio routes — Standing storm schedules with per-visit condition reports

Get Ice Dam Help Revere

A few quick questions, then pick a time. If water is coming in, call instead.

What is the zip code of the home?

Roof leaking right now? Call (888) 561-9664 — that is faster than any form.
Water coming through the ceiling?Every hour an ice dam sits there, more water gets under the shingles.Call (888) 561-9664
Same Day
For Water Already Inside
Steam
Safe On Every Covering
Suffolk
County Coverage
Insured
Harness-Certified On Every Roof
Written
Scope Before Work Starts

Homeowners across Suffolk County call about icicles. Icicles are cosmetic. The dam behind them, holding back standing water, is not. As part of our complete Revere winter roof services, crews handle commercial roof snow removal across Suffolk County.

Wet Snow, Swinging Air: Revere Ice Dams

Coastal storms deliver the heaviest snow by weight. A single nor'easter can put a wet, dense pack on a roof in Revere in one night, and the maritime air that follows rarely stays on one side of freezing for long.

Diagram showing how ice dams form on a roof from heat loss and snow melt
Heat escaping into the attic melts roof snow; the meltwater refreezes at the cold eave and the dam grows a layer every cycle.

Retrofits often made it worse rather than better. Insulation laid on an attic floor without sealing the bypasses underneath it keeps the living space warm and sends the same warm air straight to the roof deck.

Ice-barrier practice in Suffolk County

Ice-barrier membrane at the eaves is standard on re-roofs across coastal Massachusetts, and many towns enforce it strictly. Homes that have not been re-roofed since that became normal practice are the ones that leak first.

Commercial Roof Snow Removal in Revere: How The Work Runs

Why large decks carry the most risk

A long-span steel or open-web joist roof has the least margin exactly where the drift is deepest — mid-span. Snow does not settle evenly either: it piles against parapets, behind rooftop units, in the lee of higher adjoining roofs, and in valleys between bays. The average depth across the roof is not the number that matters. Ceiling Sagging or Bulging After Snow.

Crews survey depth and density at the drift points rather than the middle of the field, and calculate the working load from that against the structure's design capacity.

Reduction to a threshold, not a bare deck

The goal is bringing the load under the structure's capacity safely, with a cushion layer left on the membrane throughout.

Scraping a commercial Revere roof to bare membrane costs more, takes longer and risks the roof covering for no structural benefit.

Drains and overflows come first

Before anything else comes off, the drains, scuppers and overflow outlets get opened. Otherwise the melt from the clearing has nowhere to go and the roof trades a snow problem for a ponding one.

On a deck in Revere with internal drains that means confirming flow below, not just clearing the grate.

Mid-span is where the margin runs out

Long-span steel and open-web joist roofs carry least where the drift is deepest. The average depth across the field is not the number that matters; the depth over the longest unsupported span is.

That is where crews measure on a Revere building, and it is why two roofs with the same snowfall can be in very different trouble.

Sequencing so the load comes off evenly

Stripping one bay to the deck while the next still carries two feet creates exactly the unbalanced condition that overloads a member. Structures object less to a lot of weight spread evenly than to a moderate weight concentrated on one side.

Crews work in passes across the whole span, reducing everywhere before going deeper anywhere, and the sequence is set before anybody starts rather than left to whoever gets up there first.

Worker in orange safety gear using snow blower on commercial flat roof
A maintenance worker clears heavy snow from a commercial flat roof using a gas-powered snow blower.

What you get in Revere

  • Portfolio routesStanding storm schedules with per-visit condition reports
  • Balanced reductionLoad brought under threshold without shifting it onto one bay
  • Drains kept openScuppers and internal drains cleared so meltwater has an exit
Commercial Roof Snow Removal in Revere, MA — specification
Service specification for Revere, MA
Typical scopeSteam, 4-10 crew hours typical
DocumentationDated before and after photos, written scope in Xactimate line items
Dispatch windowSame day to 24 hours
Removal methodLow-pressure steam only. No chipping, salt or pressure washing.
Pricing modelBilled by the crew hour, rate quoted before dispatch
ServiceCommercial Roof Snow Removal in Revere, MA
Local ice-barrier practiceEave membrane standard on re-roofs

Neighborhoods and Towns We Reach From Revere

Crews working Revere cover the adjoining communities on the same route — Winthrop, East Boston, Charlestown, Nahant and Swampscott — so a storm week usually means one truck handling several addresses in Suffolk County rather than separate trips.

Nearest hub towns with their own commercial snow pages: Chelsea, Everett, Malden, Saugus, Melrose, Lynn.

Crews cover Revere and the surrounding Suffolk County towns through the whole season, and during a freeze event they run from first light until dark.

Most jobs do not stop at one service. Commercial Snow in Revere often runs alongside crane-assisted snow removal in Revere, and both get written into one scope rather than billed as separate visits.

Active leak right now? Our 24/7 Revere steam ice dam removal crews are dispatched first during a freeze event. Call (888) 561-9664.

Conditions We Work In

Commercial Roof Snow Removal In Practice

Conditions crews work in across Suffolk County. Every job is photographed before and after.

Large icicles hanging from brick municipal building roofline covered in snow
Massive icicles form along the roofline of a historic brick municipal building after a heavy winter snowfall.
Four workers in safety vests clearing snow from a flat commercial rooftop
A four-man crew works in formation to clear heavy snow from a large flat commercial roof.
Workers shoveling heavy snow off a large flat commercial roof in winter
A crew of four workers in high-visibility gear clear deep snow accumulation from a vast commercial rooftop.
FAQ

Revere Questions We Actually Get Asked

It is billed by the crew hour, and the rate plus a realistic time estimate are quoted on the phone before anyone is dispatched.

  • Scope drives the hours: length and thickness of the ice, roof pitch and height, and whether the gutters are frozen solid.
  • Access matters too — a three-story Revere roof takes longer to set up on than a ranch.
  • The invoice matches the quote. There are no surprise add-ons written on the tailgate.

Yes. Steam is safe on slate, cedar shake, tile and metal as well as asphalt, because it removes ice with heat rather than force.

  • Older Revere housing stock with original slate is exactly where chipping does the most damage.
  • Crews adjust the lance distance and dwell rather than the pressure.
  • Nothing mechanical touches the covering at any point.

More than it looks from the ground - a foot-deep dam across a thirty-foot eave is a few thousand pounds.

  • Depth is measured at the eave rather than estimated from the driveway.
  • The gutter trough underneath is usually frozen solid too and is part of the same mass.
  • That weight is one of the reasons chipping at it from a ladder goes badly.

Usually. The equipment needs a water supply and a place to park within hose reach, which is normally achievable even on a tight lot.

  • Hose runs of a few hundred feet are routine.
  • Street parking in a Suffolk County residential area is generally workable.
  • Tell dispatch about access on the call so the right setup arrives.

Often for the interior water damage, sometimes for the removal itself, but it depends entirely on your carrier and policy wording.

  • Many policies treat emergency mitigation separately under a duty to protect property clause.
  • Denials usually cite the maintenance exclusion, which dated photographs taken during the event are the direct counter to.
  • Crews photograph the dam, the entry points and the interior damage, and write the scope in Xactimate line items.
  • The coverage decision is between you and your carrier — no contractor can promise an outcome there.

Contracted properties are on a storm route and get reached in a set order that is agreed before the season. Uncontracted calls are fitted around those, prioritized by load and by whether water is already inside. During a regional event, a standing agreement is the difference between hours and days.

When the measured load approaches a meaningful fraction of design capacity, when rain is forecast onto an existing pack, when drifting has loaded one area far more than the rest, or when the drains have stopped taking water. Depth alone is a poor trigger - density is what matters, and that needs measuring.

Nearby

Commercial Snow In Towns Around Revere

Same-Day Response

Get A Revere Crew Out

Waiting for a thaw is a strategy, but it is an expensive one — the melt has to go somewhere, and it goes into the insulation first.

✓ Licensed & insured✓ Low-pressure steam only✓ Rate quoted up front✓ Photos for your claim
Online Quote(888) 561-9664